Iron Aidtm Steam System - Electrolux Iron Aid EDI97170W User Manual

8 electrolux
TM
IRON AID STEAM SYSTEM
Fill water tank
You must fill up the water tank before using
an Iron Aid programme for the first time.
Use the distilled water provided if there is
not yet any condensed water from previous
drying programmes (see chapter on "Clean-
ing and Maintenance, Emptying condensed
water container"). If, after an Iron Aid pro-
gramme is selected, the
dicator on the display lights up, you will
need to fill up the water tank with distilled
water. Otherwise, you will not be able to
start any Iron Aid programme.
Caution! Important! Only fill the water
tank with distilled or fully desalinated
water. Do not use tap water or
additives! You can also use the
condensed water from the tank, as
long as you filter it first (use the canister
supplied with the filter fitted: see figure
opposite).
1. Pull drawer containing condensed water
container out a little (1),
2. Load your laundry (do not force it in/ over-
3. Close loading door securely. Lock must
water tank in-
2. Push down the water tank's filler neck
3. Fill with distilled water from the canister
load the machine).
Caution! Be careful not to trap laundry
in between the loading door and
rubber seal.
audibly lock.
(1) and pull out it (2).
1
provided, up to the MAX mark inside the
container.
1
2