Clearing The Q1201 Sensor - Xerox DocuTech 6100 Operator's Manual
Xerox docutech 6100: operator guide
Hide thumbs
Also See for DocuTech 6100:
- Install manual (60 pages) ,
- Planning manual (16 pages) ,
- Release note (2 pages)
Table of Contents
Advertisement
Problem solving
6-18
Figure 6-9. Folding the paper
2. Use the folded sheet of paper to clear any obstructions in the
following sensor areas.
Clearing the Q1201 sensor
Clearing the Q1201 sensor should be performed only when
directed by a Customer Support Center Representative.
1. Open the processor top cover.
NOTE: The Q1201 sensor is located under the processor top
cover on the right side.
2. Locate the Q1201 sensor, as shown in figure 6-10.
DocuTech 61xx Operator Guide
Advertisement
Table of Contents
