Xerox DocuTech 6100 Operator's Manual page 133

Reliable stacking may be
Stock expected
Type or Xerographic bond paper in
condition good condition
Drilled paper
Reliable stacking may be
Stock expected
Size 8 x 10 inches to 9 x 14
inches (203 x 254 mm to
229 x 356 mm)
Weight: Main Substance 20 to 24 (75 to
Body 90 g/m2)
Weight: Maximum: substance 65
Covers (176 g/m2)
Weight: Insert Maximum: substance 65
(176 g/m2)
Minimum: substance 20
(75 g/m2)
DocuTech 61xx Operator Guide
Table 7-14. Stitcher satisfaction guide
Less reliable stacking may
be expected
Slightly curled paper
Table 7-15. Binder satisfaction guide
Less reliable stacking may
be expected
Substance 16 (60 g/m2)
Without covers
Heavier than substance 65
(176 g/m2)
Transparencies
Heavier than substance 65
(176 g/m2)
Lighter than substance 20
(75 g/m2)
Technical information
Suggested alternatives
Do not use excessively curled
paper.
Transparencies must contain
some opaque sheets to avoid
finisher jams.
Stock not defined here is
included in the "Using various
stocks" section in this guide.
Suggested alternatives
Consider stitching for smaller
or larger sizes.
Avoid weights less than
substance 16 (60 g/m2) or
greater than substance 24 (90
g/m2)
Consider stitching for weights
outside these limits.
Avoid removable stripe
transparencies
Limit the inserts outside of
substance 16 to 24 (60 to 90 g/
m2) to 10% of the sheet count
in a set.
Avoid adjacent inserts for
substance greater than 24 (90
g/m2).
Transparencies or never-tear
paper cannot be used as
inserts when binding.
7-17