Xerox DocuTech 6100 Operator's Manual page 68

Routine maintenance
5-26
• If there is no wire on the spool, use the wire cutters to pull
the remaining wire carefully out of the tubing, as shown in
figure 5-23.
NOTE: The wire cutter tool needed to perform this
procedure is located next to stitcher spool B.
Figure 5-23. Removing the wire from the tubing
• If there is wire on the spool, hold it on the spool and
carefully rewind the remaining wire out of the tubing and
onto the stitcher spool, as shown in figure 5-24.
DocuTech 61xx Operator Guide