Limitations - Xerox DocuTech 6100 Operator's Manual

Technical information

Limitations

Common size Inches x
name inches
8.0 x 10.75
US Letter/ US 8.5 x 11.0
A-size
9.0 x 12.0
US Legal 8.5 x 14.0
9.0 x 14.0
9.0 x 15.0
10.5 x 14.5
US Ledger/ 11.0 x 17.0
US B-Size
7-20
With the introduction of other DFA-complaint finishing devices for
use with the DocuTech 61xx family of printers, additional paper
stock sizes can be handled by the finishing devices, both straight
from the Bypass Transport or rotated.
Do not rotate paper sizes that will not fit through the DocuTech
61xx Bypass Transport to a third party finishing device.
Before creating a document to be rotated by the Bypass
Transport, set the paper stock size required to fit within the
limitations detailed in the following tables and as follows:
• The diagonal dimension of the paper stock must be equal to
or less than 18 inches (457 mm).
• The paper stock must be within the paper stock size
parameters of the DocuTech 61xx printer paper trays.
Refer to the DocuSP controller on-line help system for
information on setting finisher devices and finisher profiles to
enable rotation to a third party finisher.
Table 7-17. Common US paper sizes
Millimeter Diagonal in
equivalent inches
203 x 273 13.40
216 x 279 13.90
229 x 305 15.00
216 x 356 16.38
229 x 356 16.64
229 x 381 17.49
267 x 368 17.90
279 x 432 20.25
Comment
Can be (similar to or
rotated the same as)
YES
YES 2-up of US 5.5
x 8.5 in.
(statement)
YES 2-up of US 6.0
x 9.0 in.
(common
"book" size)
YES ISO Foolscap
YES 2-up of US 7.0
x 9.0 in.
NO* 2-up of US 7.5
x 9.0 in.
NO* 2-up of US
7.25 X 10.5 in.
(Executive)
NO 2-up of US 8.5
x 11.0 in.
(Letter)
DocuTech 61xx Operator Guide