Xerox DocuTech 6100 Operator's Manual page 132

Technical information
Reliable stacking may be
Stock expected
Stacker Unfinished sheets:
capacity
3300 sheets, substance
16 (60 g/m2)
3000 sheets, substance
20 (75 g/m2)
2500 sheets, substance
24 (90 g/m2)
1875 sheets, substance
32 (120 g/m2)
1360 sheets, substance
110 (200 g/m2)
Type or Xerographic bond paper in
condition good condition
Drilled paper
Reliable stacking may be
Stock expected
Size 8 x 10 inches to 9 x 14
inches (203 x 254 mm to
229 x 356 mm)
Weight Substance 16 to 110 (60 to
200 g/m2)
Set size limit Collated: Up to 65 sheets
due to copy of substance 20 (75 g/m2)
paper weight or 0.28 inch (7 mm) thick
sets
Uncollated: 50 copies
maximum per stitch 0.28
inch (7 mm) thick sets
Stacker Stacker capacity adjusts
capacity automatically to suit
various set sizes
7-16
Table 7-13. Stacker capacity
Less reliable stacking may
be expected
Slightly curled paper
Table 7-14. Stitcher satisfaction guide
Less reliable stacking may
be expected
Collated: Up to 70 sheets of
substance 20 (75 g/m2)
Suggested alternatives
To allow a continuous run,
unload outer stack before
inner stack reaches capacity.
Do not use excessively curled
paper.
Transparencies must contain
some opaque sheets to avoid
finisher jams.
Stock not defined here is
included in the "Using various
stocks" section in this guide.
Suggested alternatives
Use the top tray for larger
sizes
Weights outside the limits
shown are not recommended.
Reduce the paper weight to
enable stitching more sheets
per collated set.
Check the stitch quality.
To allow a continuous run,
unload outer stack before
inner stack reaches capacity.
DocuTech 61xx Operator Guide