Adjusting The Binder Tape Registration - Xerox DocuTech 6100 Operator's Manual
Xerox docutech 6100: operator guide
Hide thumbs
Also See for DocuTech 6100:
- Install manual (60 pages) ,
- Planning manual (16 pages) ,
- Release note (2 pages)
Table of Contents
Advertisement
Routine maintenance
Adjusting the binder tape registration
5-38
11. Close the finisher doors.
The binder tape knob is used to align the registration of the
binder tape to the top edge of a bound book.
This procedure has no effect on the length of the tape, but you
should perform this procedure before adjusting the tape length.
To adjust the length, refer to the on-line help.
Perform the following steps to adjust the binder tape registration.
1. Ensure that the tape guides are clean and free of glue
residue.
Refer to the procedure, "Cleaning the binder," in this section.
2. Determine the adjustment amount for the top edge of the
book.
3. Open the finisher doors.
4. Measure the distance between the top of the binder tape and
the top of the book.
5. Locate the black binder tape knob on the front of the binder
drawer.
DocuTech 61xx Operator Guide
Advertisement
Table of Contents
