Throughput Speed; Resolution - Xerox DocuPrint 100 Installation Planning Manual

System overview

Throughput speed

With small paper
sizes
Monthly print
volume

Resolution

Incoming input resolution of document
Printer 240 dpi data
180 NPS/IPS Interpolated by printer to
600 x 1920 dpi
96/4635 NPS/IPS Converted by controller to
300 or 600 dpi, then
interpolated by printer to
600 dpi
1-2
The 96, 4635 and 180 NPS/IPS can print at the following speeds,
using stocks 8 by 10 inches / 203 by 254 mm or larger:
• 96 and 96 MICR: Up to 96 impressions per minute
• 4635 and 4635 MICR: Up to 135 impressions per minute
• 180 and 180 MICR: Up to 180 impressions per minute.
When you use the smaller papers, such as 7 by 10 inches / 178
by 254 mm or B4, with the 7 by 10-inch paper option kit, the
throughput rates increase:
• 4635/4635 MICR: Up to 154 impressions per minute
• 180/180 MICR: Up to 206 impressions per minute
NOTE: The 7 by 10-inch kit is not available on the 96 IPS.
The monthly print volumes for these systems are:
• 96: Up to 3 million impressions
• 4635: Up to 4 million impressions
• 180: Up to 6 million impressions
The DocuPrint 96/4635/180 provides high print quality at 600 dpi
resolution. It can receive data at 240, 300, or 600 dpi.
The following table shows how data streams of different
resolutions are interpolated.
Table 1-1. Data stream conversion
300 dpi data
Interpolated by printer to
600 x 2400 dpi
Interpolated by printer to
600 x 600 dpi
600 dpi data
Print at 600 x 600 dpi
Print at 600 x 600 dpi
Installation Planning Guide