Xerox DocuPrint 100 Installation Planning Manual page 179
Xerox docuprint 100: install guide
Hide thumbs
Also See for DocuPrint 100:
- Software manual (498 pages) ,
- Service manual (304 pages) ,
- Operator's manual (234 pages)
Table of Contents
Advertisement
Installation Planning Guide
•
IPX number of Connected LAN [000000##] (assigned by
network administrator)
•
Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
3. After installation, change from PSERVER to RPRINTER as
follows:
a. Sign on to privilege as an administrator.
b. Enter Configure to specify the printer configuration.
c. Select Option 3, enter <N> to the Review All
Information question, and type Novell to review Novell
information.
d. Enter the following information:
•
Remote Printer for Novell Netware -- <Y>
•
Use Print Server for Novell Netware -- <N>
•
Name of Novell Print Server -- PGazette
•
IPX Internal Network Number [000000##] (assigned
by network administrator)
•
IPX number of Connected LAN [000000##] (assigned
by network administrator)
•
Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
e. Save all of the options.
4. Enter Create Virtual Printer Gazette (must be the same
name as the PSERVER printer name).
5. Enter Start All.
6. Reboot the NPS/IPS.
7. Perform the following tasks from the Novell server console.
a. Type Load PSERVER PGazette.
b. Make sure the PSERVER window displays and Gazette
activates and is waiting for jobs.
8. Provide all of the required installation parameters identified in
the checklist provided in chapter 2 of this guide to your
service representative.
D-11
Advertisement
Table of Contents
