State-Based Softkeys - Mitel 6930 User Manual

C S
ONFIGURING OFTKEYS
Key Function
Empty
: Keys can also be set up to quickly to access features such as call return (*69) or voicemail. Quick
NOTE
access features like call return and voicemail must first be configured on your PBX in order to work on
your phone. See your System Administrator for more information.

State-Based Softkeys

On the 6930's bottom softkeys, you can configure a specific state to display when a softkey is being used.
The following table describes the states available to configure for the softkeys.
State
Idle
Connected
Incoming
Outgoing
Busy
The following table identifies the applicable default states for each softkey type on the IP phone.
Softkey Type
None
Speed Dial
DND
XML
Flash
Park
Pickup
Last Call Return
Call Forward
Speed Dial/Xfer
Speed Dial/Conf
Description
Indicates the key has no function assigned but
should be displayed as any empty softkey on the
phone's screen.
Description
The phone is not being used.
The current line is in an active call (or the call is on hold).
The phone is ringing.
The user is dialing a number, or the far-end is ringing.
The current line is busy because the line is in use or the
line is set as DND.
Default States
All states disabled.
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
All states disabled.
Connected
Idle, Outgoing
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
Idle, Connected, Incoming, Outgoing, Busy
S -B S
TATE ASED OFTKEYS
85