Using The Paging Key; Discreet Ringing Key; Configuring A Discreet Ringing Key - Mitel 6930 User Manual

C S
ONFIGURING OFTKEYS
Click Save Settings to save your changes
11.

Using the Paging Key

The following procedure describes the use of the Pagingkey on the IP phone. The procedure assumes
you have already configured the Paging key using the Mitel Web UI.
:
NOTE
The recipient of a paging call can set a global DND to ignore any incoming pages.
1.
For incoming paging, the phone uses the Intercom configuration settings. The incoming page is
2.
dependent on the Allow Barge Inparameter setting and the idling/on call state.
On the IP phone, press the softkey or expansion module key you configured for Paging.The phone
1.
opens a multicast RTP session and an outgoing OR incoming phone screen displays.
Press the Dropkey to end the multicast RTP session and return to the Homescreen.
2.
: If you enable global DND on the phone, the incoming multicast RTP session is dropped.
NOTE

Discreet Ringing Key

You can configure a Discreet Ringingkey on the phone that when pressed allows you to toggle on/off
the Discreet Ringing feature. When the Discreet Ringing feature is enabled, if a call is incoming, the phone
will play the configured ring tone once only. All applicable visual indicators (LED for the corresponding
Line key, Message Waiting Indicator [MWI], etc...) will behave normally.
: If a custom ring tone is selected and Discreet Ringing is enabled, the phone will not play the custom
NOTE
ring tone during an incoming call. Ring tone 1 will be played once instead.

Configuring a Discreet Ringing Key

Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
2.
keys.
In the Type field, selectDiscreet Ringing.
3.
D R K
ISCREET INGING EY
122