Outgoing Redial List - Mitel 6930 User Manual

Hide thumbs Also See for 6930:
Table of Contents

Advertisement

M
C
AKING
ALLS
After a beep tone, your phone automatically connects with the remote extension and you can speak
3.
through its speaker.
To cancel the intercom, press
4.
When you are finished speaking, hang up the phone by placing the handset back on-hook or by
5.
pressing
or the line/call appearance button for the active call.When you hang up, the remote
phone also hangs up.
You can set specific incoming Intercom call features on the 6930 IP phone using the Mitel Web UI. The
following table describes these features.
Incoming Intercom Features in Mitel
Web UI
Microphone Mute
Auto Answer
Play Warning Tone
Allow Barge In
: For more information about the incoming Intercom features and for procedures on setting these
NOTE
features, see
"Incoming Intercom Call Features"

Outgoing Redial List

Outgoing Redial ListNote: Outgoing Redial List information in this User Guide describes the phone's
: Outgoing Redial List information in this User Guide describes the phone's native Outgoing Redial
NOTE
List. In some environments, the Outgoing Redial List key may bring up an Outgoing Redial List provided
by the call manager; therefore, depending on your call manager, the Outgoing Redial List on your phone
may function and behave differently then what is documented in this User Guide. If this is the case,
contact your System Administrator for more information regarding your specific Outgoing Redial List.
The Outgoing Redial List stores information for up to the last 100 numbers you called. Your phone logs
the name/number of the called party, when you called, and if the call was answered or missed. Additional
information such as the duration of the call, line used, and call features utilized during the call can also be
viewed.
or the Cancel key.
Description
Allows you to enable or disable the microphone on the IP
phone for Intercom calls made by the originating caller.
Allows you to enable or disable the IP phone to
automatically answer an Intercom call. If auto-answer is
enabled on the IP phone, the phone plays a tone (if Play
Warning Tone is enabled) to alert the user before
answering the intercom call. If auto-answer is disabled,
the phone treats the incoming intercom call as a normal
call.
Allows you to enable or disable a warning tone to play
when the phone receives an incoming intercom call on
an active line.
Allows you to enable or disable how the phone handles
incoming intercom calls while the phone is on an active
call.
on
page
185.
O
R
L
UTGOING
EDIAL
IST
129

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents