G
S
ETTING
TARTED
Or, edit the existing MiVoice Connect Configuration Server address.
For Manual Configuration, enter information in the following fields:
•
In the Download Protocol field, select the protocol for downloading firmware from the server.
–
In the Primary Server field, enter the domain name or the IP address of the server.
–
In the Primary TFTP Path field, enter the name of the folders where the firmware you want to install
–
must be stored.
For Manual Software Upgrade, enter information in the following fields:
•
In the Download Protocol field, select the protocol for downloading firmware from the server
–
In the Server field, enter the domain name or the IP address of the server.
–
In the Port field, enter the server port number that is used for downloading firmware.
–
In the Path field, enter the name of the folders where the firmware you want to install must be stored.
–
:
NOTE
The phone will auto reboot after configuring the Voice Services at the initial bootup on the TUI.
•
The phone will auto reboot if the user enters the configuration server details and/or configure a line on
•
the WebUI.
V
S
OICE
ERVICES
13