C
S
ONFIGURING
OFTKEYS
BLF/Xfer and Blind Transfer Calls: When the focused line is in the connected state, pressing the
•
BLF/Xferkey transfers the call to the extension unconditionally, disregarding the status of the moni-
tored extension.
If transferring a call to an extension fails, a message Transfer Faileddisplays on the phone, and you can
reconnect the call (get the call back) by pressing the line key again.
BLF/Xfer and Call Forward: When the focused line is in the ringing state, pressing the BLF/Xferkey
•
forwards the call to the extension unconditionally, disregarding the status of the monitored extension.
BLF/Xfer and Speed Dial: When the focused line and the monitored extension are idle, pressing the
•
BLF/Xferkey causes the phone to go offhook and dial the number of the extension.
Configuring a BLF/Xfer Key Using the Mitel Web UI
Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1through Key 44 on the Top keys.
2.
In the Typefield, select BLF/Xfer.
3.
In the Valuefield, enter the monitored extension or the extension to transfer calls to (for example,
4.
3500).
In the Line field, select the line for which you want to use the key functionality.Valid values are:
5.
global
–
1through24
–
Expansion Module Keys
Select from Key 1through Key 84(M695).
6.
In the Typefield, select BLF/Xfer.
7.
In the Valuefield, enter the monitored extension or the extension to transfer calls to (for example,
8.
3500).
In the Line field, select the line for which you want to use the key functionality. Valid values are:
9.
global
–
BLF/X
FER
107