Speed Dial/Conf - Mitel 6930 User Manual

C S
ONFIGURING OFTKEYS
In the Typefield, select Speed Dial/Xfer.
3.
In the Label field, enter a label for the Speed Dial/Xfer key.
4.
In the Valuefield, enter the speed dial extension or the extension to transfer calls to (for example,
5.
3600).
In the Line field, select the line for which you want to use the key functionality.Valid values are:
6.
global
–
1through24
–
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
7.
Expansion Module Keys
Select from Key 1through Key 84(M695).
8.
In the Typefield, select Speed Dial/Xfer.
9.
In the Valuefield, enter the speed dial extension or the extension to transfer calls to (for example,
10.
3600).
In the Line field, select the line for which you want to use the key functionality.Valid values are:
11.
global
–
1 through 24
–
Click Save Settings.
12.

Speed Dial/Conf

The 6930 allows you to configure a softkey or expansion module key to be used as a speed dial confer-
ence key (Speed Dial/Confkey) while remaining in the current call. This key allows a user on a call to
conference another party at a pre-defined number while remaining in the call.
For example, while on an active call, a user can use the Speed Dial/Confkey to dial a recording service
and have the resulting conference recorded.
: If currently in a conference, the Speed Dial/Conf key is disabled on the active call.
NOTE
If you configure a softkey or expansion module key as a Speed Dial/Confkey and you press this key while
on an active call, the focused line changes to the dialing line. A Cancelsoftkey displays on the phone
allowing you to abort the conference speed dial if required.
: This feature is not compatible with centralized conferencing.
NOTE
S D /C
PEED IAL ONF
109