Mitel 6930 User Manual page 59

C Y P
USTOMIZING OUR HONE
With a valid time server enabled your IP phone will synchronize the time displayed with the specified
configuration server. The phone will use the time from Time Server 1 unless it is not configured or unavail-
able, in which case it will move on to Time Server 2, and if necessary Time Server 3.
Press on the phone to enter the Options List.
1.
Navigate to the Time and Date > Set Date and Timeoption and press the select button or Select
2.
softkey.
If you want to synchronize the time and date using a time server, ensure there is a checkmark in the
3.
box corresponding to the Use Network Timesetting. If there is no checkmark, press the select button
to enable the Use Network Time setting.
Press the down navigation key to highlight Time Server 1,Time Server 2,orTime Server 3.
1.
Using the keys on the dialpad, enter an IP address or domain name for the time server. Use the Back-
2.
spacekey to move back a space and delete a character. Use the Dotsoftkey to enter dots within the
IP address or domain name. Use the 123 softkey to toggle between entering numbers and entering
letters.
If you want to manually set the date and time, press the select button to clear the checkmark from the
3.
Use Network Time box and disable the setting.
Press the down navigation key to highlightEnter Timeor Enter Date.
1.
Using the keys on the dialpad, change the time and date accordingly. When entering the time, use the
2.
AM/PM softkey to toggle between AM and PM.
Press the Savesoftkey to save your changes.
3.
T D
IME AND ATE
48