Configuring A Paging Key Using The Mitel Web Ui - Mitel 6930 User Manual

C S
ONFIGURING OFTKEYS

Configuring a Paging Key Using the Mitel Web UI

Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
2.
keys.
In the Typefield, select Paging.
3.
In the Label field, enter a label to apply to this key.
4.
In the Valuefield, enter a multicast IP address and a port number for the Pagingkey. When you press
5.
this key, the phone initiates an outgoing multicast RTP session to the specified address using the
specified port (e.g. 239.0.1.15:10000).
:
NOTE
When you select Pagingfor the Typefield, the Linefield is disabled.
a.
The Value field allows for one multicast address entry only.
b.
To receive RTP steams for group paging, you must also configure the Paging Listen Addressespa-
6.
rameter at the path, Basic Settings >Preferences > Group Paging RTP Settings. For more information
about setting this parameter, see
Expansion Module Keys
Select from Key 1through Key 84(M695).
7.
In the Typefield, select Paging.
8.
In the Valuefield, enter a multicast IP address and a port number for the Paging key. When you press
9.
this key, the phone initiates an outgoing multicast RTP session to the specified address using the
specified port. (For example, 239.0.1.15:10000).
:
NOTE
When you select Pagingfor the Typefield, the Linefield is disabled.
a.
The Value field allows for one multicast address entry only.
b.
To receive RTP steams for group paging, you must also configure the Paging Listen Addressespa-
10.
rameter at the path, Basic Settings >Preferences > Group Paging RTP Settings. For more information
about setting this parameter, see
"Group RTP Paging"
"Group RTP Paging"
on
page 187.
on .
page 187
P K
AGING EY
121