C
S
ONFIGURING
OFTKEYS
URIparameter must match the list name configured. Otherwise, no values display on the 6930 screen and
the feature is disabled.
Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1through Key 44 on the Top keys.
2.
In the Typefield, select BLF/List.
3.
In the Linefield, select a line number that is actively registered to the appropriate SIP proxy you are
4.
using. Valid values are:
global
–
1through24
–
: The Labeland Valuefield are not required. The BLF/List name is configured in the BLF List
NOTE
URIfield instead.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
5.
In the BLF List URIfield, enter the name of the BLF list defined on the applicable Mitel call manager
6.
Busy Lamp field page for your particular user. For example, sip:9@192.168.104.13.
: Contact your System Administrator for the BLF List URI.
NOTE
Expansion Module Keys
Select from Key 1through Key 84(M695).
7.
In the Line field, select a line for which to apply this key. Valid values are:
8.
global
–
1through 24
–
: TheValuefield is not required. The BLF/List name is configured in the BLF List URIfield
NOTE
instead.
In the BLF List URIfield, enter the name of the BLF list defined on the applicable Mitel call manager
9.
Busy Lamp field page for your particular user. For example, sip:9@192.168.104.13.
: Contact your System Administrator for the BLF List URI.
NOTE
Click Save Settings.
10.
BLF/L
K
IST
EY
99