Table of Contents
Advertisement
Replace shelving in your preferred positions
FIRST USE
Shelf positions
We recommend placing the sliding shelves
on positions 2 and 4 for everyday cooking.
To replace wire shelves
Check the shelf is positioned correctly,
Guard rail
with the guard rail at the back, then slide
into place on the side racks.
To replace sliding shelves
1 Grip the shelf at the front (making sure
you are holding the wire shelf and the
sliding frame together).
2 Make sure the shelf is level and facing
Guard rail
the right way with the guard rail at
Front bar
the back.
3 Place the shelf on top of the side racks
at the desired height, hooking the rear
tags over the side racks on both sides.
4 Push the shelf all the way into the oven,
making sure the front tags are also
securely hooked over the side racks.
Ensure sliding shelves are positioned
on top of the side rack wires instead of
between them.
When there is food in the oven, take care
to slide the shelves horizontally when
extending them. This will prevent the tags
lifting off the side racks and the shelf
tipping over.
13
Advertisement
Table of Contents
