Related Manuals for Fisher & Paykel OS60NDTDX1
Summary of Contents for Fisher & Paykel OS60NDTDX1
- Page 1 COMBINATION STEAM OVEN MINIMAL OS60NDTDX1, OS60NMTDB1 & OS60NMTDG1 models INSTALLATION GUIDE BI EU...
- Page 2 SAFETY AND WARNINGS READ AND SAVE THIS GUIDE WARNING! Electric Shock Hazard WARNING! To avoid hazard, follow these instructions carefully before installing or using this appliance. Failure to follow this advice may result in electric shock or death. Please make this information available to the person installing the appliance—doing so could reduce your installation costs.
-
Page 3: Prior To Installation
PRIOR TO INSTALLATION INSTALLATION MILESTONES Ensure that: Milestone indicator The oven cavity is square and level based on the required dimensions The installation will comply with all clearance requirements and applicable standards and These milestones represent areas throughout regulations that are pivotal to an optimal installation The isolating switch will be easily accessible to the customer with the oven installed outcome. - Page 4 COMPONENTS PARTS TOOLS Supplied Not supplied Screws (2) Metal side shelves Powered driver Cross-head fixing nut (2) screwdriver...
-
Page 5: Product Dimensions
PRODUCT DIMENSIONS POWER OUTLET LOCATION Product Dimensions a Overall height of oven B Overall width of oven c Overall depth of oven (excludes handle and front metal trim) d Depth of oven frame, control panel and door (excludes handle and front trim) E Depth of chassis (includes terminal block) F Height of chassis G Width of chassis... -
Page 6: Cabinetry Dimensions
CABINETRY DIMENSIONS PROUD INSTALL 16-20mm PROFILE PLAN FLUSH INSTALL OS60N 16-20mm CABINETRY DIMENSIONS A Minimum inside height of cavity B Minimum inside width of cavity C Minimum inside depth of cavity D Overall height of cabinetry (cavity around front frame) E Overall width of cabinetry (cavity around front frame) If installing a cooktop above the oven, ensure adequate clearance is provided as per the cooktop manufacturer’s instructions. - Page 7 CHECK CAVITY UNPACK PRODUCT Do not lift or move the product using the handle. Keep all packing materials until the unit has been inspected. Inspect the product to ensure there is no shipping damage. If any damage is detected contact the dealer or retailer you brought the product from to report the Measure cavity dimensions.
- Page 8 UNPACK PRODUCT REMOVE DOOR Remove all control panel packaging. The Open the door and remove all cable ties control panel can be moved manually as and packaging holding the oven shelves needed. Take care when handling. in place. Grip the shelves at the front, making Dispose responsibly.
-
Page 9: Connect Power
CONNECT POWER POSITION OVEN INTO CAVITY This oven must be connected to the mains power supply only by a suitably qualified person. This oven must be earthed. Some models only*: For dark cabinetry, the supplied trim can be used to enhance clashing finish. Before connecting the oven to the mains power supply, check that: To install, remove the trim adhesive and press to secure to cavity. - Page 10 REFIT DOOR ALIGN AND SECURE Align oven with surrounding cabinetry Holding the door on both sides, carefully and appliances. lift door back onto the hinges. Open the door fully and push each Using the product as a guide, pre-drill 2 locking lever down and lock into place.
- Page 11 REFIT SHELVES TEST OVEN Sliding shelves Follow the guidance on screen to ensure Place shelves back into the oven at the desired oven turns on and heats correctly. level. Refer to your User Guide for more Ensure shelves are level and correctly information.
-
Page 12: Installer Checklist
INSTALLER CHECKLIST TO BE COMPLETED BY THE INSTALLER Ensure the oven is level and securely fitted to the cabinetry. Open the oven door slowly until it is fully open and check there is adequate clearance between the bottom of the door and the lower trim. This is to ensure correct air circulation. - Page 13 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2023. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue.