Installing The Y Cable - Eizo LMM56800 Instructions For Use Manual

Setup and installation

4.4 Installing the Y cable

4.4 Installing the Y cable
The LMM56800 scope of delivery includes three Y cables as adapters for connecting from
VGA and DVI-D to DVI-I. Using the Y cable, you can connect one analog and one digital
video source each to inputs 1/2, 10/11, and 19/20.
Procedure
1. Attach a Y cable from the scope of delivery to inputs 1/2, 10/11, and 19/20 of the
LMM56800
Note: The labels attached to the Y cable indicate the sockets into which the connectors
are to be inserted.
2. Hand tighten the screws of the connector. You do not need a tool.
3. Repeat the steps for installing the Y cable for inputs 10/11 and 19/20 of LMM56800.
Fig.: Installed Y cable
16
LMM56800
Instructions for Use, 10/2019