Changing The Password - Eizo LMM56800 Instructions For Use Manual

Configuration and operation
6.6 "Base settings" (extended) sidebar
Setting
Server
See also
Setting the system time [} 36]

6.6.3 Changing the password

Two passwords are assigned as default for the LMM56800. For the administrator ("Service")
the password "super" and for the user with expanded rights B ("Advanced") the password
plus". If you want to change one of these passwords you have either log on as administrator
or as user with extended rights (see also Logging in and out)
Only the password for the user logged in at the time is changed.
To assign a new password, click the "Change password" button.
The "Change password" dialog window opens.
Note
The password may not contain special characters.
34
Description
"Use DHCP" is not set
• The IP address and net mask can be assigned here.
Note: The information has to fit with the existing network. Ask the local
administrator for the correct settings.
Default setting: IP Address 10.1.1.104, Net mask 255.0.0.0
• The host name and domain can be assigned.
• The gateway and DNS server IP address can be assigned.
• The MTU value can be entered
Default setting: MTU value 1500
Default setting: "Use DHCP" is set.
Information about the server the LMM should access when the firmware is
updated or configuration data stored.
See also Updating the firmware, Backup/Restore [} 38].
Instructions for Use, 10/2019
LMM56800