Calling Up System Information - Eizo LMM56800 Instructions For Use Manual

Configuration and operation
6.5 "Base settings" (abbreviated) sidebar

6.5.1 Calling up system information

To open the window with general system information, in the "Base settings" sidebar click .
Device information
Monitor A/B
Network
28
Information on the hardware and software versions of the Large Monitor
Manager.
Information on the connected monitor. The information is monitor-spe-
cific.
Information on the network settings specified for the Large Monitor Man-
ager.
One of the IP addresses is the default IP address of the Large Monitor
Manager. It cannot be changed.
The other IP addresses are either assigned automatically by the DHCP
server or specified by the administrator. See also chapter "Setting the
network connection".
The Large Monitor Manager has three IP addresses when DHCP is used.
Otherwise it has two IP addresses.
Default setting: IP address 192.168.1.10
Fall-back IP address: 169.254.213.44 (cannot be changed)
LMM56800
Instructions for Use, 10/2019