Instances" Sidebar - Eizo LMM56800 Instructions For Use Manual

In this example the horizontal position is 0 pixels and the vertical position is 0 pixels. The
zero position is the top left corner of the displayable screen area.
Click the field and enter the values required for the horizontal and vertical position.
Saving changes
• Click the
to save changes to the current layout.

6.9 "Instances" sidebar

Displaying the "Instances" sidebar
To open the "Instances" sidebar you have to move the mouse to the upper edge of the
screen. The sidebar contains miniature thumbnail or the camera icon for all available in-
stances.
Assigning instances
Proceed as follows to assign instances to a window:
1. Select a layout in the "Layout" sidebar.
2. Click a miniature thumbnail of an instance in the "Instances" sidebar and drag it to the
required window.
3. Repeat the procedure to assign additional instances.
4. If needed, use "Drag & Drop" to exchange the window contents.
5. To save the layout, in the "Layout" sidebar click
Note
When switching between layouts, all changes are retained, but are not automatically
saved. When the LMM56800 is rebooted or switched off, all unsaved changes are lost.
LMM56800
Instructions for Use, 10/2019
button in the "Layout" sidebar to save all changes in all layouts. Or click
Configuration and operation
6.9 "Instances" sidebar
.
53