Operation - Eizo LMM56800 Instructions For Use Manual

6.13 Operation

The LMM56800 operates via a remotely linked PC with web browser.
After configuring the LMM56800, operation is limited to the following applications:
• Changing the layout.
• Assigning instances in layouts.
Layout changes can be carried out using the standard interface. View Management is used
to assign the instances. This means, for example, it is possible to exchange instances.
Changing the layout
To switch the layout:
1. In the address line of the web browser enter "<IP address of the LMM56800>".
The standard interface opens.
2. Click the required layout.
Note: The active layout is highlighted green.
The layout changes immediately.
Assigning instances
To assign instances:
1. In the address line of the web browser enter "<IP address of the LMM56800>/vm".
View Management opens.
2. Click the instance to be assigned.
Note: The selected instance is highlighted green. To undo the selection, click the se-
lected instance again.
3. Click the window where the instance should be used.
The instance is assigned immediately.
Note
Change the layout
You can also change layouts in View Management:
• Click the required layout.
Note
Drag & Drop
The described functions can also be executed in the web browser using Drag & Drop.
LMM56800
Instructions for Use, 10/2019
Configuration and operation
6.13 Operation
55