Input Configuration" Sidebar - Eizo LMM56800 Instructions For Use Manual

Configuration and operation

6.7 "Input configuration" sidebar

6.7 "Input configuration" sidebar
The "Input configuration" sidebar is only visible in the "Administrator" role. It opens as soon
as you move the mouse pointer to the bottom edge of the screen. The physical inputs are
selected and configured here. Instances can be created, edited, and deleted.
① The inputs are marked by colored triangles in the lower right corner The meanings are as fol-
lows:
• A green triangle
• A red triangle
• A yellow triangle
If you click a video input with the left mouse button, the connected instances are displayed (one
instance in this case).
If you double-click a video input with the left mouse button, the "Video input configuration" dialog
window is displayed
If you move the mouse pointer over a video input, one of the following tooltips is displayed de-
②
pending on the state of the video input:
• The timing is displayed for an active input .
• The message "Not connected" is displayed for an inactive input .
• The message "No information" is displayed for an input with information that cannot be read .
③
Virtual channel: When the Large Monitor Manager is connected to a network, you can display
images and text for example from an external device.
④ If an instance does not exist for a video input, a new instance can be created using this button.
⑤ Miniature thumbnail of an instance.
⑥ When you move the mouse pointer over the miniature thumbnail ⑤ of the instance, this toolbar
is displayed. You can change, duplicate, or delete an instance.
If you click this button with the left mouse button, the "Instance configuration of a video
input" dialog window is displayed. You configure the selected instance here.
If you click this button with the left mouse button, the active instance is duplicated. All
settings of the instance are copied.
If you click this button with the left mouse button, the selected instance is deleted. If the
instance was assigned to a window, the symbol
40
means an active input.
means an inactive input.
indicates an input with unreadable information.
appears in the window:
LMM56800
Instructions for Use, 10/2019