Setting The System Time - Eizo LMM56800 Instructions For Use Manual

Configuration and operation
6.6 "Base settings" (extended) sidebar
Note
Assigning rights
Only the administrator can change the rights assigned to roles. Additional rights or roles
cannot be created.

6.6.5 Setting the system time

To set the system time, click the "Set system time" button in the "Base settings" (extended)
sidebar.
The "Set system time" dialog box opens.
With NTP server
When the Large Monitor Manager is operated in a network that uses an NTP server as the
time basis, the system time can be synchronized with the server. Otherwise, it has to be en-
tered
Note
If you use an NTP server, the system time of the Large Monitor Manager is set to the coor-
dinated world time (UTC).
1. Activate the option "Use NTP Server".
2. Enter the server address in the "NTP Server" field.
3. Click "OK".
Without NTP server
1. Incrementally change the date and time with the arrow keys
values are displayed.
2. Click "OK".
Restart the device to apply the changes.
36
and until the required
LMM56800
Instructions for Use, 10/2019