Updating The Firmware - Eizo LMM56800 Instructions For Use Manual

Large monitor manager

Hide thumbs Also See for LMM56800:

Table of Contents

6.6.6 Updating the firmware

NOTICE

Firmware update

• Ensure that the power supply to the Large Monitor Manager is not interrupted during the

firmware update. An interrupted firmware update can result in device failure.

• Perform a firmware update in consultation with your local distributor or on the recom-

mendation of EIZO only.

• Only use firmware updates released by EIZO to ensure proper function of the Large

Monitor Manager.

To update the firmware proceed as follows :

1. Click the "Update firmware" button in the "Basic settings" (extended) sidebar.

The following dialog box opens.

2. Select "Source".

If you select "LMM" then the firmware file must be stored on the configured server.

If you select "Browser" the firmware file must be stored on the connected file system,

e.g., on the workstation.

3. Use the "Browse" button to find the storage location of the new firmware file.

4. Upload the new firmware file.

5. Start the firmware update by clicking "OK".

LMM56800

Instructions for Use, 10/2019

Configuration and operation

6.6 "Base settings" (extended) sidebar

Table of Contents