Editing The Window In The Selected Layout - Eizo LMM56800 Instructions For Use Manual

6.8.2 Editing the window in the selected layout

A toolbar is displayed in the upper right corner of each window in the selected layout.
The toolbar buttons have the following functions:
Button
Buttons shown
in gray
LMM56800
Instructions for Use, 10/2019
Description
If a button appears in gray, its function cannot be used for the current edit.
Deletes the selected window.
The selected window can be divided into multiple windows. Click the button and
select the number of windows required.
The window moves to the available free space in the layout. Click the button.
The sets the window to 1:1 aspect ratio.
With this button you can decide whether and where an information banner appears
on the selected window. The information banner shows the name of the instance
assigned to this window.
The information banner can be shown either above (Position 1) or within (Position
2) the window. It can also be omitted.
Note: Make sure no image information is covered if the information banner is in
the window.
Opens the menu for editing the instance in this window.
The size of the window cannot be changed if the pin is set. It can only be deleted
or shifted, and the created instance in this window can be edited.
Configuration and operation
6.8 "Layout" sidebar
Position 1
Position 2
51