Configuration And Operation; Definition Of Terms - Eizo LMM56800 Instructions For Use Manual

Configuration and operation

6.1 Definition of terms

6 Configuration and operation
6.1 Definition of terms
Before configuring the Large Monitor Manager (LMM) you should know the following terms:
Term
Video input
Image source
Video signal
Sidebar
Permanent sidebar
Tooltip
Layout
Instance
Remote operation
24
Explanation
Existing connection on the connection panel of the LMM.
Source of a video signal, such as a PC The video source must be con-
nected to a video input of the LMM.
The video signal contains the picture information and is sent, for exam-
ple, from the graphics card of the video source to the video input of the
LMM.
The sidebars include the LMM operating menus. They are located on the
outer edges of the screen (i.e. top, bottom, left and right), and open
when you move the mouse pointer over them. The respective sidebar
closes when you move the mouse pointer away.
During operation via remote access, the sidebars can be opened using
icons in the respective edges of the display area. Move the mouse
pointer on the respective button.
Please note that some information is visible only to service or users with
the appropriate rights. Some sidebars are therefore not visible unless a
password is entered.
The sidebar can be displayed permanently and fixed by clicking the pin.
Information about a video signal can be displayed in the "Input Configu-
ration" sidebar. Position the mouse pointer over the video input to dis-
play it.
A layout describes the arrangement (position and size) of windows on
the screen.
Defined presentation of a video signal of a video source within a window
of a layout. For each video input of the LMM multiple instances can be
displayed with different presentations, e.g. 1:1, with a border, or as a
cropping area. Each instance can be assigned to one or more windows
and layouts.
Operation of the LMM via LAN or WLAN.
LMM56800
Instructions for Use, 10/2019