Setting The Network Connection - Eizo LMM56800 Instructions For Use Manual

6.6.2 Setting the network connection

To set the network connection, click the "Network settings" button in the "Base set-
tings" (full) sidebar.
The "Network settings" dialog window opens.
You can make the following settings:
Setting
Client network settings
(Large Monitor Man-
ager)
LMM56800
Instructions for Use, 10/2019
Description
Set DHCP usage
The DHCP (Dynamic Host Configuration Protocol) enables the assignment
of the network configuration to clients through a server.
If DHCP is used, the automatically assigned IP address can be found un-
der "General system information" in the right sidebar.
"Use DHCP" set
• The IP address and net mask are assigned automatically and cannot
be changed.
• The host name and domain can be assigned.
• The gateway and DNS server are assigned automatically and cannot
be changed.
• The MTU value is assigned automatically and cannot be changed. MTU
(Maximum transmission unit) specifies the maximum size of the data
packets that can be sent in the network.
Configuration and operation
6.6 "Base settings" (extended) sidebar
33