Generating A Π/4 Dqpsk Modulation Sensitivity Bit Error Test - Agilent Technologies ESG Series User And Programming Manual

ESG Family Signal Generators
Options UN8 and 202
Generating a π/4 DQPSK Modulation Sensitivity Bit Error Test
In this example, you configure the signal generator to the initial settings of a π/4DQPSK
modulation sensitivity bit error test. The initial settings are format default values, which
you can change once the setup is complete.
This example is presented in the following formats:
• NADC on page 4-90
• PHS on page 4-92
• TETRA on page 4-94
Real-Time I/Q Baseband Generator User's and Programming Guide
Programming Commands and Examples
Programming Examples
4-89