Denon AVR-1602 Operating Instructions Manual page 37

• Operating the surround mode and surround parameters from the main unit's panel.
1
Press the SELECT buttons to select the surround mode.
8ELECT
{Main u/it)
.... 1 ]
o o o o o o o o o o o
1 2 1,3
• When press the UP button
LOGIC_ 5CH STEREO_ MONO MOVIE_ ROCKARENA•
]
VIRTUAL SURROUND_ MATRIX_ VIDEO GAME _ JAZZ CLUB_
• When press the DOWN button
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode
button then operate the selector
_RROUND
MOOE
(Main u/Jr)
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 38
SUP,R(XJND
pARAME_R
(Main u/Jr)
Display the parameter you want to adjust, then press the SELECT UP/DOWN buttons to set it
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically When the input signal switches to a DTS signal, the mode automatically switches to DTS surround
37