Denon AVR-1602 Operating Instructions Manual page 19
Hide thumbs
Also See for AVR-1602:
- Operating instructions manual (165 pages) ,
- Manuel d'utilisation (28 pages) ,
- Brochure & specs (2 pages)
Advertisement
Available languages
Available languages
Input the distances from the listening position to the speakers and set the surround delay time
Preparations:
Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right)
LI:
Distance from center speaker to listening position
L2:
Distance from front speakers to listening position
Ls:
Distance from surround speaker to listening position
CAUTION:
•_ Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer,
or so that the difference in distance (L2 - L1) is 5 feet or less.
•_ Set the surround speakers (left and right) at the same distance from the front speakers (left and right)
or the subwoofer,
or so that the difference
in distance (L2 - L3) is 15 feet or less
FL
Center
FR
Listening
_
position
SL
SR
1
Use the _
(left) and _
(right) buttons to set the distance from the front speakers and subwoofer
to the
listening position.
[6 F::F;;:NT..":iii;W i :2i:( l
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
("/SW"
appears only when subwoofer
= yes)
Press the SELECT or (_D (down) button to switch to the center speaker setting
NOTE:
• The speaker distance can be adjusted between
0 and 60 feet in steps of 1 foot.
2
Use the _
(left) and (_
(right) buttons to set the distance from the center speakers to the listening
position
L'?=
,"" E:"k, "r E:"E:=
l
..... L...,, L.....
i 2 "i:'"i.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the SELECT or _
(down) button to switch to the surround speaker setting.
NOTE:
• No setting when "None"
has been selected for the center speaker
Use the (_D (left) and _
(right) buttons to set the distance from the surround
speakers to the listening
position
.... • .....=
..= .. ==
.=......
=
...
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the SELECT or [_[3 (down) button to enter the setting and switch the DIGITAL input (COAX) setting.
NOTE:
• No setting when "None"
has been selected for the surround
speakers
19
Advertisement
