Denon AVR-1602 Operating Instructions Manual page 32

1
2
4
Select the input source.
[Playback with a digital input I
@ Select an input source set to digital (COAXIAL/OPTICAL)
(see page 20).
EX:
DVD/VDp DVD/VDP
{Main unit) (Remote control unit}
2; Set the input mode to "AUTO" or DTS.
INPUT UODE INFUT I/_OE
1 3
" Z ° o o
2 2
{Main ul/it) (Remote control unit}
Select the
Dolby/DTS
Surround mode
SURROUND
MODE
{Rel_lote contrd atilt/
When performing this operation from the ma_n unit's panel,
press the SURROUND MODE button, then press the SELECT
buttons and select "DOLBY/DTS"
• The following appears on the display.
(DOLBY PLII, DOLBY PROLOGIC, DOLBY DIGITAL, DTS)
{Main u/it)
Playa program source with the L_I_TI]_AL , _ mark.
_
2-
5,6,7,8--
QvGv®
"ED _OE3 [3D
C:3 G3 OD (3D
DENON
-1
--4,5,6,7,8
uu • The Dolby Digital indicator lights when
DIGITAL
}O_ Light playing Dolby Digital sources.
• The DTS indicator lights when playing
_ Light DTS sources
Set the surround parameter according to the source.
First, press the SURROUND button
NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit.
(Remote co,it tel unit)
{_U_ Use the _ (left) and _ (right) buttons to set the CINEMA EO.
C :[i".iEi=ii:::iEi:;! OF::F::
]
(left) button
MEN_(_-_ PresstheSELECTorl:]D (down) buttontoswitchtotheD. COMRsetting.
(Initial)
(right) button
32