Denon AVR-1602 Operating Instructions Manual page 28
Hide thumbs
Also See for AVR-1602:
- Operating instructions manual (165 pages) ,
- Manuel d'utilisation (28 pages) ,
- Brochure & specs (2 pages)
Advertisement
Available languages
Available languages
1
2
Set the external input (EXT.
IN) mode
Press the EXT [N to switch
the external input.
e_T.tN
INPUTM00E
(Mainul/Jt)
(Remote c ontroui/Jt}
Once this is selected,
the input signals connected
to the FL
(front left), FR (front right), C (center), SL (surround left), and
SR (surround right) channels of the EXT [N jacks are output
directly to the front (left and right), center, surround
(left and
right) speaker systems without passing through the surround
circuitry.
In addition,
the signal input to the SW (subwoofer)
jack is
output to the PRE OUT SUBWOOFER
jack
Cancelling the external input mode
To cancel the external input (EXT. IN) setting, press the INPUT
MODE (AUTO, PCM, DTS) or ANALOG
button to switch
to
the desired input mode. (See page 25.)
INPUT M(_E
/_.LOG
_UT
MOD(_
(Mail
unit}
(Remote contro] unit)
• When the input mode is set to the external input (EXT. IN), the play
mode (STEREO, DOLBY/DTS SURROUND,
5CH STEREO or DSP
SIMULATION}
cannot be set
.....
Oi
°
_
o
o
o
o
o
o
o
o
o
o
o
2 1
NOTES:
• In play modes other than the external input mode, the signals
connected
to these iacks cannot be played
In addition, signals
cannot be output
from channels
not connected
to the input
jacks.
• The external input mode
can be set for any input source
To
watch video while listening to sound, select the input source to
which the video signal is connected,
then set this mode
Follow step 1 to 3 under "Playing the input source".
Start recording on the tape or video deck
For
instructions,
refer
to
the
component's
operating
instructions
Simultaneous
recording
The signals ofthe
source selected withthefunction
selectorbutton
are outputsimultaneouslytothe
CDR/TAPE and VCR REC OUTjackslf
a totaloftwo
tape and/orvideo
decks are connected
and setto
the recording mode, the same source can be recorded
simultaneously
on
every decks
NOTES:
• The AUDIO IN's signal selected with the function selector button are output to the CDR/TAPE and VCR AUDIO OUT jacks
• The DIGITAL IN's signal selected with the function
selector button are output to the DIGITAL OUT (OPTICAL) jack
28
Advertisement
