Denon AVR-1602 Operating Instructions Manual page 31

7
Set the various surround parameters
• CINEMA EQ setting
[S]Y__Jiiii_;'ii ::Eii:! il)i::i:
L_I or I_ 1_ or [_]
• PANORAMA setting
[ i::<:i', ',iii',::;i:_ i',i:_ i:iFi:: I
• DIMENSION setting
[ [>i iqii;ii i riii; i 0i i 3 I
• CENTER WIDTH setting
[CEiiNZP _ii',>;i _,0 I
• DEFAULT setting
NOTE:
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Surround parameters _1)
Pro Logic ]1 Mode:
The Cinema mode is the standard required mode for all A/V
systems
The Music mode is recommended as the standard mode for
autosound music systems (no video), and is optional for AN
systems
The Pro Logic mode offers the same robust surround processing
as original Pro Logic in case the source contents is not of optimum
quality
Select one of the modes ("Cinema", "Music" or "Pro Logic").
Panorama Mode:
This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall
imaging
Select "OFF" or "ON"
Dimension Control:
This control gradually adjust the soundfield either towards the front
or towards the rear.
The control can be set in 7 steps from o to 6.
Center Width Control:
This control adjust the center image so it may be heard only from
the center speaker; only from the left/right speakers as a phontom
_mage; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
-_ Select "Yes" to reset to the factory defaults.
,_ Stop pressing buttons once you have completed setting the
surround parameters. After several seconds the normal display
reappears and the settings you have made are automatically set
31