Denon AVR-1602 Operating Instructions Manual page 24

[] OPERATION
lm
Preparations:
Check that aEE connections are proper.
1
Turn on the power
Press the ON/STANDBY button on the main unit or AVR/AVC
button on the remote control unit to turn on the power
ON / STANDBY
_'--_ AVP,/AV_
\
{M_[_I unit) {Remote control uTlit}
• ON/STANDBY
When the button is pressed, the power turns on and the
display lights after approximateEy 1 second.
When pressed again, the power turns off, the standby
mode is set and the dispEay turns off.
Several seconds are required from the time the power
operation switch is set to the "ON" position until sound is
output This is due to the built-in muting circuit that
prevents noise when the power switch is turned on and off.
SeEect the front speakers
Press the SPEAKER A or B button to turn the speaker on.
8PE_KER
o o
A B
(Mail unt)
24