Creating A Bass Track - Akai MPC X User Manual

Creating a Bass Track

Let's try recording a bass line. Unlike a drum kit, it's important to be able to play and record a bass sound
chromatically, so this will be slightly different than setting up the drum kit.
Adding a bass line over the drum part means we need to work on a new track. A track is simply a layer of a sequence.
Each track uses a program within your project. You can work with multiple tracks in a single sequence (e.g., a drum
track, a bass track, a piano track, etc.). When you play the sequence, all of them will play simultaneously.
First, let's make an empty track.
To select a new track:
1. Press Main to go back to Main Mode.
2. Double-tap the Track field in the center-left part of the screen, and then tap Track 2 (unused) in the list of tracks
that appears.
Alternatively, tap the Track + button at the bottom of the screen until (unused) appears in the Track field.
Let's create a new program for this track to use.
To create a new program:
1. In the Track section in the middle of the screen, tap the piano-keys icon. This icon indicates a keygroup
program, which is necessary to play the bass sound chromatically with the pads.
A name for the new keygroup program will appear in the Program field in the lower part of the screen.
2. In the Program section in the lower part of the screen, tap the cursor icon on the right edge.
3. Use the virtual keyboard that appears to enter a new name, and then tap Do It.
58