Akai MPC X User Manual page 226

Hide thumbs Also See for MPC X:
Table of Contents

Advertisement

Use the Reverse button to select in which direction the sample will play. When on, the sample will play in reverse.
When off, the sample will play in the normal forward direction.
Use the Pad Loop button to cycle through the available Pad Loop modes.
Important: For Pad Loop to work, you must (1) set the Sample Play field (in the LFO Modulation tab) to Note On
instead of One Shot and (2) set the Slice field (in the first Samples tab) to Pad instead of All or a slice number.
Off: The sample will not loop.
Forward: You can hold down the pad to cause that sample to repeat from the Loop Position
to the end of the sample. Release the pad to stop the repeating playback.
Reverse: You can hold down the pad to cause that sample to play in reverse, repeating from
the end of the sample to the Loop Position. Release the pad to stop the repeating playback.
Alternating: You can hold down the pad to cause that sample to play from the Loop Position to
the end of the sample and then play in reverse until it reaches the Loop Position again. This will
repeat as long as you are holding the pad down. Release the pad to stop the repeating playback.
226

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents