Akai MPC X User Manual page 318

Use the Parameter field to select the parameter you want to control with the currently selected Q-Link knob.
When the MIDI Track tab is selected:
Mixer: Off, Volume, Pan, Mute, Solo
When the Audio Track tab is selected:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Insert 1–4: Off, other available parameters depend on the effect
When the Program tab is selected and Type is set to Program:
Mixer: Off, Volume, Pan, Mute, Solo, Send 1–4
Program: Off, Global Semi Tune, Global Fine Tune
Insert 1–4: Off, other available parameters depend on the effect
When the Program tab is selected and Type is set to Pad:
Mixer: Off, Level, Pan, Pad Mute, Pad Solo, Send 1–4
Program:
Off
Tuning
Filter Cutoff
Filter Resonance
Filter Env Amount
Amp Env Attack
Amp Env Decay
Amp Env Release
Amp Env Hold
Amp Env Sustain
Filter Env Attack
Filter Env Hold
Filter Env Decay
Filter Env Sustain
Filter Env Release
Amp Env Attack Curve
Amp Env Decay Curve
Amp Env Release Curve Layer Sample Pan (1–4)
Insert 1–4: Off, other available parameters depend on the effect
When the Return tab is selected:
Mixer: Off, Volume, Pan, Mute
Insert 1–4: Off, other available parameters depend on the effect
When the Submix tab is selected:
Mixer: Off, Volume, Pan, Mute, Send 1–4
Insert 1–4: Off, other available parameters depend on the effect
When the Main tab is selected:
Mixer: Off, Volume, Pan, Mute
Insert 1–4: Off, other available parameters depend on the effect
Tap the Momentary checkbox to turn momentary behavior on or off.
When on, moving the Q-Link knob will adjust its parameter, but the parameter will immediately return to its
original position (when you turned Momentary on) when you release the Q-Link knob.
When off, moving the Q-Link knob will adjust its parameter, and the parameter will remain at its new setting
when you release the Q-Link knob.
Filter Env Attack Curve
Filter Env Decay Curve
Filter Env Release Curve
Pitch Env Attack
Pitch Env Hold
Pitch Env Decay
Pitch Env Sustain
Pitch Env Release
Pitch Env Decay Mode
Pitch Env Attack Curve
Pitch Env Decay Curve
Pitch Env Release Curve
Pitch Env Depth
Pitch Env Type
DrumFX (1–8)
DrumFX Type (1–8)
Layer Level (1–4)
Layer Semi Tune (1–4) Layer Reverse (1–4)
Layer Fine Tune (1–4)
Velocity to Start
Vel to Filter Attack
Velocity to Env Amount Layer Slice Tail Length (1–4)
Velocity to Filter
LFO to Pitch
LFO to Filter
LFO to Amp
LFO to Pan
LFO Wave
LFO Rate
LFO Sync
Velocity to Pitch
Vel to Volume Attack
Velocity to Amp
Velocity to Pan
Layer Slice (1–4)
Layer Offset (1–4)
Layer Loop Xfade (1–4)
Layer Loop Xfade Type (1–4)
Layer Slice Tail Start (1–4)
Layer Pitch Random (1–4)
Layer Level Random (1–4)
Layer Pan Random (1–4)
Layer Offset Random (1–4)
Attack Random
Decay Random
Cutoff Random
Resonance Random
Total Random Amount
LFO Level
LFO Delay
LFO Fade In
318