Pad Scene - Akai MPC X User Manual

Pad Scene

In the Pad Scene Q-Link Edit Mode, the Q-Link knobs control your favorite 16 parameters for the currently selected
pad. You can select another pad simply by pressing it, allowing you to adjust the same 16 parameters for that new pad.
(These assignments are automatically saved with other user settings. Any project you load will use these assignments.)
To select a pad, press it.
Next to the top row of Q-Link knobs on the screen, tap one of these tabs to select the type of parameters you want
to control with the Q-Link knobs:
Mixer: general mixer parameters
Program: pad parameters (i.e., parameters used in Program Edit Mode)
Use the Parameter field to select the parameter you want to control with the Q-Link knobs.
Mixer: Off, Level, Pan, Pad Mute, Pad Solo, Send 1–4
Program:
Off
Tuning
Filter Cutoff
Filter Resonance
Filter Env Amount
Amp Env Attack
Amp Env Decay
Amp Env Release
Amp Env Hold
Amp Env Sustain
Filter Env Attack
Filter Env Hold
Filter Env Decay
Filter Env Sustain
Filter Env Release
Amp Env Attack Curve
Amp Env Decay Curve
Amp Env Release Curve
Tap the Momentary checkbox to turn momentary behavior on or off.
When on, moving the Q-Link knob will adjust its parameter, but the parameter will immediately return to its
original position (when you turned Momentary on) when you release the Q-Link knob.
When off, moving the Q-Link knob will adjust its parameter, and the parameter will remain at its new setting
when you release the Q-Link knob.
Filter Env Attack Curve
Filter Env Decay Curve
Filter Env Release Curve
Pitch Env Attack
Pitch Env Hold
Pitch Env Decay
Pitch Env Sustain
Pitch Env Release
Pitch Env Decay Mode
Pitch Env Attack Curve
Pitch Env Decay Curve
Pitch Env Release Curve
Pitch Env Depth
Pitch Env Type
DrumFX (1–8)
DrumFX Type (1–8)
Layer Level (1–4)
Layer Sample Pan (1–4)
Layer Semi Tune (1–4)
Layer Fine Tune (1–4)
Velocity to Start
Vel to Filter Attack
Velocity to Env Amount
Velocity to Filter
LFO to Pitch
LFO to Filter
LFO to Amp
LFO to Pan
LFO Wave
LFO Rate
LFO Sync
Velocity to Pitch
Vel to Volume Attack
Velocity to Amp
Velocity to Pan
Layer Slice (1–4)
Layer Reverse (1–4)
Layer Offset (1–4)
Layer Loop Xfade (1–4)
Layer Loop Xfade Type (1–4)
Layer Slice Tail Length (1–4)
Layer Slice Tail Start (1–4)
Layer Pitch Random (1–4)
Layer Level Random (1–4)
Layer Pan Random (1–4)
Layer Offset Random (1–4)
Attack Random
Decay Random
Cutoff Random
Resonance Random
Total Random Amount
LFO Level
LFO Delay
LFO Fade In
322