Akai MPC X User Manual page 360

AIR Tube Drive
This effect is designed to reproduce the sound of an
overdriven tube amplifier.
Decimator
Decimator down-samples the incoming signal by removing
bits from the digital signal. The difference between
decimation and resampling is that Decimator does not use
any filtering to mask or correct digital artifacts. The result is
an effect ranging from mild to almost completely pure digital
distortion, depending on the setting and the source material.
Distortion Amp
This effect is designed to reproduce the sound of a tube
amplifier at high volumes.
Distortion Custom
This effect is a highly customized distortion, capable of a
wide range of useable sounds.
Parameter Value Range
Drive 0–100%
Headroom -30.0 – 0.0 dB
Saturation 0–100%
Output -20.0 – +20.0 dB
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Decimate 0–100
Bit Reducer 4–32
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Drive 0–100
Tone 0–100
Dynamics 0–100
Output 0–100
Parameter Value Range
Dry/Wet 0–100 (dry–wet)
Drive 0–100
+Soft 5–75
+Clip 5–50
–Soft 5–75
–Clip 5–50
Low -18.0 – 18.0 dB
Mid -18.0 – 18.0 dB
High -18.0 – 18.0 dB
Output -18.0 – 18.0 dB
Default Value
0%
-15.0 dB
50%
0.0 dB
Default Value
100
0
32
Default Value
100
50
50
50
50
Default Value
100
50
2
25
2
25
0.0
0.0
0.0
50
360