Akai MPC X User Manual page 414

Compressor/Hype
Use this tab to apply and adjust the settings for the built-in Compressor and Hype effects.
Parameter
Compressor Threshold
Ratio
Output
Mix
Knee
Attack
Release
On/Off
Hype High
Low
On/Off
Description
Signal level after which the compressor will be applied. 0.0 – -60. dB
Amount of compression applied.
Amount of additional output gain for the compressed
signal.
Wet/dry mix of the compressor effect.
How gradually the compressor reacts as the threshold
is reached.
Lower values apply a "soft" knee (compression is
applied more slowly as signal approaches the
threshold), and higher values apply a "hard" knee
(compression is immediately applied when the
threshold is reached).
Length of time to apply the compression.
Length of time for compressed signal to return to
original level.
Enables or disables the effect.
Dampens or maximizes high end frequencies.
Dampens or maximizes low end frequencies.
Enables or disables the effect.
Value Range
1.0:1 – 100.0:1
0.0 – 30.0 dB
0–100%
0–100%
100 us – 300 ms
10 ms – 4.00 s
Off, On
-100 – 0 – +100%
-100 – 0 – +100%
Off, On
414