Audio Tracks - Akai MPC X User Manual

Audio Tracks

You can load up to four insert effects to each audio track. You can do this in Main Mode and the Channel Mixer.
To load an audio track insert effect in Main Mode:
1. When the Audio tab is selected (in the lower-left corner), use the Track field to select the audio track.
2. If the channel strip is not already shown, tap the small eye icon below the Project field to show it.
3. Tap the waveform icon at the top of the channel strip. The channel strip will now show settings for the current
audio track.
4. Tap the area under Inserts, and then use the screen that appears to load or edit effects.
To load an audio track insert effect in the Channel Mixer:
1. Use the Mixer field in the upper-left corner to select Audio Tracks.
2. In the touchscreen, tap the pad that corresponds to the desired audio track.
3. Tap the area under Inserts, and then use the screen that appears to load or edit effects. Alternatively, tap the Insert
tab at the bottom of the screen (tap it multiple times to select a different insert slot), and then double-tap the desired
pad on the screen. You could also use the data dial or –/+ buttons to select an effect immediately.
119