Table of Contents
Advertisement
• FQXSPEM4032I: Acoustic Mode [arg1] has been engaged. Fan speed limits are in place.
This message is for the use case where Acoustic Mode is engaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0274
User Action:
Information only; no action is required
• FQXSPEM4033I: Acoustic Mode [arg1] has been disengaged to allow adequate cooling.
This message is for the use case where Acoustic Mode is disengaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0275
User Action:
Information only; no action is required
• FQXSPEM4036I: Dust filter measurement schedule is configured on server [arg1] by user [arg2]
from [arg3] at IP address [arg4].
Dust filter measurement schedule is configured
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0305
User Action:
Information only; no action is required
• FQXSPEM4037I: Attempting to perform scheduled dust filter measurement on server [arg1].
Attempting to perform scheduled dust filter measurement
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0306
User Action:
Information only; no action is required
• FQXSPEM4038I: Dust filter measurement schedule is disabled on server [arg1] by user [arg2] from
[arg3] at IP address [arg4].
.
Chapter 2
XClarity Controller events
47
Advertisement
Table of Contents
