Lenovo 7X69 Manual page 178

Hide thumbs Also See for 7X69:
Table of Contents

Advertisement

1. Collect XCC Service Data.
2. Power off system.
3. This error message will provide the UID of the missing DCPMM,
4. Use Lenovo Service Client or contact Lenovo Support to parse log to get correct location for
DCPMM Find the missing DCPMM and install it in the correct location.
5. If an error occurs, follow steps 1 and 4 to get details on new error message.
6. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0037G: Intel Optane DCPMM interleave set (DIMM [arg1]) is migrated from another
system (Platform ID: [arg2]), these migrated DCPMMs are not supported nor warranted in this
system.
Severity: Warning
Parameters:
[arg1] DIMM Silk Label, 1-based
[arg2] Platform ID
User Action:
Complete the following steps:
1. Check the system specification.
2. Move the DCPMM back to the original machine or same machine type platform, or backup the
persistent region data and delete namespace, disable security, security erase, follow DCPMM guide
to create new goal if the target installed system support DCPMM.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0038K: All Intel Optane DCPMMs could not be auto unlocked because of no passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Provision the passphrase for Intel Optane DCPMM auto unlock or unlock DCPMMs in OS with Intel
DCPMM tools.
2. Methods to provision the passphrase:
a. -Option 1. enable security on all Intel Optane DCPMMs found through System Setup with Scope
of "Platform" under the (System Settings > Intel Optane DCPMMs > Security).
b. -Option 2. enable security on all Intel Optane DCPMMs found through OneCLI command
(OneCLI.exe config set IntelOptaneDCPMM.SecurityOperation "Enable Security") and (OneCLI.
exe config set IntelOptaneDCPMM.SecurityPassphrase "the user passphrase").
Note: If the security state is mixed, then disable security for those DCPMMs in System Setup by
selecting the scope of "Single DCPMM" under the (System Settings > Intel Optane DCPMMs >
Security) firstly before take the action to provision the passphrase. If DCPMMs are not unlocked,
system will not see or access the persistent region of DCPMMs.
• FQXSFMA0039K: One or more Intel Optane DCPMMs could not be auto unlocked because of
invalid passphrase.
Severity: Warning
User Action:
Complete the following steps:
174
ThinkSystem SR860 Messages and Codes Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem sr8607x70

Table of Contents