Table of Contents
Advertisement
• FQXSPUP4009I: Please ensure that the system is flashed with the correct [arg1] firmware. The
Management Controller is unable to match the firmware to the server.
This message is for the use case where a firmware version does not match the server.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0324
User Action:
Information only; no action is required
• FQXSPUP4010I: Flash [arg1] of [arg2] from [arg3] succeeded for user [arg4] .
This message is for the use case where a user has successfully flashed the firmware component (MC Main
Application, MC Boot ROM, BIOS, Diagnostics, System Power Backplane, Remote Expansion Enclosure
Power Backplane, Integrated System Management).
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0325
User Action:
Information only; no action is required
• FQXSPUP4011I: Flash [arg1] of [arg2] from [arg3] failed for user [arg4].
This message is for the use case where a user has not flashed the firmware component from the interface
and IP address due to a failure.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0326
User Action:
Information only; no action is required
• FQXSPWD0000I: Watchdog Timer expired for [WatchdogElementName].
This message is for the use case when an implementation has detected a Watchdog Timer Expired.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0368
User Action:
Information only; no action is required
.
Chapter 2
XClarity Controller events
141
Advertisement
Table of Contents
