Table of Contents
Advertisement
CIM Prefix: PLAT CIM ID: 0442
User Action:
1. Flash XCC firmware to the latest level and reboot system.
2. If the problem still exist, please contact local service.
• FQXSPUP0007L: Invalid or Unsupported firmware or software was detected on system
[ComputerSystemElementName].
This message is for the use case when an implementation has detected an Invalid/Unsupported Firmware/
Software Version.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0446
User Action:
Reflash or update XCC firmware
• FQXSPUP2005I: The firmware or software on system [ComputerSystemElementName] are
compatible.
This message is for the use case when an implementation when the Firmware and Software are
compatibile.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Hardware Incompatibility
SNMP Trap ID: 36
CIM Prefix: PLAT CIM ID: 0443
User Action:
Information only; no action is required.
• FQXSPUP4000I: Please ensure that the Management Controller [arg1] is flashed with the correct
firmware. The Management Controller is unable to match its firmware to the server.
This message is for the use case where a Management Controller firmware version does not match the
server.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0031
User Action:
Update the XCC firmware to a version that the server supports. Important: Some cluster solutions require
specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the
latest level of code is supported for the cluster solution before you update the code.
• FQXSPUP4001I: Flash of [arg1] from [arg2] succeeded for user [arg3] .
138
ThinkSystem SR860 Messages and Codes Reference
Advertisement
Table of Contents
