Section 6 − Dynasty Operation; Controls - Miller Maxstar 400 Owner's Manual

SECTION 6 − DYNASTY OPERATION
6-1.

Controls

4
14
13
5
.
For all front panel switch pad controls:
press switch pad to turn on light and en-
able normal function.
.
Green on nameplate indicates a TIG
function, Gray indicates a normal Stick
function.
1 Encoder Control
Use Encoder control in conjunction with ap-
plicable front panel function switch pads to
change values for that function.
2 Memory Card Port And Indicator
.
A complete Parts List is available at www.MillerWelds.com
8
7
6
Port is used to add features to the machine,
and update software. Indicator is lit while
card is being accessed.
3 Ammeter And Parameter
Shows actual amperage while welding and
preset amperage while idle. It also shows
parameter selection options when in any
menu.
4 Voltmeter And Selected Parameter
Display
Shows actual rectified average voltage
when voltage is present at the weld output
terminals. It also show parameter descrip-
tions when in any menu.
2 3
9 11
10
5 Polarity Control (Dynasty Only)
6 Process Controls
7 Output Controls
Display
8 Pulser Controls
9 Sequencer Controls
10 Gas/DIG Controls
11 AC Waveshape (Dynasty Only)
12 Amperage And Spot Time Control
13 Memory
14 Memory Display
Displays active memory.
1
12
273670-B
OM-275857 Page 39